RE: Angle steel code check in Staad pro?
AXIS command not available in unified code 2010? what is alternative command to design either by principal or geometry axis
View ArticleRE: Angle steel code check in Staad pro?
The AXIS parameter is not available for AISC 360-10 anymore because the software now checks by itself as to whether for that particular angle section/boundary conditions, the code allows checking as...
View ArticleRE: Angle steel code check in Staad pro?
A wiki has now been posted on this communities.bentley.com/.../28594.axis-parameter-not-available-anymore-in-the-aisc-360-unified-code
View ArticleAngle steel code check in Staad pro?
TeamHow Staad pro treat the angle in the analysis design when one leg is vertical? By default, staad treat the minor axis of the angle as horizontal. Thanks in advanceBruce
View ArticleClik here to view.
RE: Max Live Load Reduction
When you start a new file in Ram Concept you get to select the default design code, units and choose between an elevated slab and mat. But, since there are many potential codes for live load reduction...
View ArticleMax Live Load Reduction
I am using RAM Concept's live load reduction capabilities and have noticed that the "Max Live Load Reduction" is set to 40% as a default.IBC allows a maximum reduction of up to 50% per 1607.10.1. Is...
View ArticleRE: Import Foundation Input from a Microsoft Office Excel® spreadsheet to...
Here is the easiest way to get a good spreadsheet. Open up STAAD Foundation Advanced and choose Open to bring up the Open dialog box. Browse to the installation folder of SFA and inside the Examples...
View ArticleImport Foundation Input from a Microsoft Office Excel® spreadsheet to...
Hi, I tried to import the support information in StaadFoundation Advanced using the spreadsheet posted in the forum, but the software report that is not in correct format, please could you post a new...
View ArticleRE: SP3D - STAAD - SP3D model transfer
This looks like an issue that has to be taken up with Intergraph tech support. Please upload the .stp file that you exported from SP3D and also the one that you exported from STAAD.Pro and let me see...
View ArticleSP3D - STAAD - SP3D model transfer
Hi,I have successfully transferred SP3D model to STAAD using CIS/2 transfer.Now how do I transfer back STAAD model to SP3D?Thank you.
View ArticleI have problem when installing STAADpro.
I have try install. in step 1 until 6 are nothing problem. but when step 8. in Connection Client was fail, error 2147023746. what must i do, and why it was happened?
View ArticleRE: Buckling mode shapes
In order to see the Buckling Shape, you need to run the analysis with the Advanced Analysis Engine. If you have a license for it, you can activate it on the start up page of STAAD.Pro.
View ArticleBuckling mode shapes
When performing a buckling analysis, how is the shape viewed? I see the buckling load factor can be seen in the output file but there is no buckling mode shape tab in the post processing GUI. STAAD...
View ArticleRE: Technical query: Connection issue of perpendicular wall plate elements...
It will be better if you can upload the input file here to have a detailed look. However, one workaround is, in case the distance between the two nodes is very small, you can set up a rigid link...
View ArticleRE: Technical query: Connection issue of perpendicular wall plate elements...
Thank you sir. With reference to the query, I am uploading the elevated service reservoir model for ur reference. Pls let me know if any other way comes up. Regards,MandakiniTata Consulting Engineers...
View ArticleTechnical query: Connection issue of perpendicular wall plate elements with...
Hello sir,I have been modelling an elevated service reservoir in STAAD Pro V8 SS5 whose tank is surrounded by 4 core walls 6 m high at the top which need to be connected with the tapered cylindrical...
View ArticleRE: staad pro has encountered a problem and needs to close
I'm not sure if this ever got resolved but i am having the same problem. I click to open STAAD Pro ver. 20.07.11.33 and the introduction screen comes up followed by the Windows message "STAAD Pro...
View ArticleRE: RAM Structural Systems Model No Longer Running
Please follow the steps on the web page below. Typically, this error is caused by remnant files in the working directory (step...
View ArticleClik here to view.
RAM Structural Systems Model No Longer Running
I was working on a RSS model that suddenly stopped working.I get this error:This happened after I deleted the USR file that causes my file to not be able to open.Let me know if I can get my model...
View ArticleRE: staad pro has encountered a problem and needs to close
Barry, Are you experiencing this with every STAAD file, or with just some specific files? In the folder X:\SProV8i SS6\STAAD\Examp\US you will find a number of STAAD files. Copy a few of them to an...
View Article