RE: The obtrusive Connect log-in screen - let's get rid of it,please
Ah, well, that'll be something for Seth and the Bentley crew to address. I haven't found a way around the message box from the user side. There's a line in the RAM ini file that says...
View ArticleThe obtrusive Connect log-in screen - let's get rid of it,please
I do not wish to use the facilities of Connect; the scope of our operations does not involve multiple engineers in multiple locations, just a small team on one site. I have read about the benefits it...
View ArticleRE: Wind Loading for Open Structures
Sye, I really like this wind load generator for open structure. Could you let me know which release is the latest one for STAADPro, STAAD-foundation Advanced, and RAM Connections? Thanks, KC Fong
View ArticleRE: Wind Loading for Open Structures
Thanks KC. The latest STAAD.Pro version is 20.07.11.70. Latest STAAD Foundation Advanced version is 08.00.00.00. Regarding RAM Connection, I assume you are asking about the integrated version of RAM...
View ArticleWind Loading for Open Structures
Does anyone know a way to apply wind loads to only certain members of an open structure? I know there is a work-around for this when analyzing closed structures, but I am hoping there is a way to do...
View ArticleClik here to view.
RE: PLANE STRESS WARNING
I have attached the technical help manual of STAAD regarding plane stress (5.24). In the manual itself it is showing no bending effect.Please clarify this problem.
View ArticlePLANE STRESS WARNING
Hi, I modelled a truss member using plate construction in STAAD, i applied plane stress option for all the diagonal members for transfering axial forces alone. But after analysis it is showing many...
View ArticleClik here to view.
RE: Continuous Cable with Intermediate Cable Supports
(Please visit the site to view this file)I'm not sure if I am using Advanced Nonlinear Cable Analysis, I have tried to model my model similar to the one posted in communities.bentley.com/.../102697 but...
View ArticleContinuous Cable with Intermediate Cable Supports
Hi,I am trying to model a continuous cable with 13 intermediate vertical cable supports as well as 2 horizontal supports at the ends. The results don't seem to be making sense, as the supports at the...
View ArticleRE: SP3D - STAAD - SP3D model transfer
You may transfer the model by using CIS/2 as well.
View ArticleRE: Cold formed steel sections: STAAD.Pro
1) You may check this Wiki post: communities.bentley.com/.../24674.how-to-add-a-new-section-database-to-staad-pro 2) I do not think this option is available for the cold formed channels.
View ArticleClik here to view.
Cold formed steel sections: STAAD.Pro
hello support,1. We need to use C40024 and C40030 sections, is it possible to input them into the library ?2. For Type Specification can not choose D(Double Channel back to back) and BA(Double Channel...
View ArticleRE: Problem with DFF command not check in steel design with STAAD Pro SS6...
Hi,Please refer to the attached staad file. For example take Beam #133 (T-Support) the deflection ratio is very less. but if you check the relative deflection its huge. Can you please check and revert...
View ArticleProblem with DFF command not check in steel design with STAAD Pro SS6 built...
Please see STAAD input command below. I try to change DFF parameter in any value (not 0) but the result still show all member pass all code check.Please verify if I'm wrong...Best regard.STAAD...
View ArticleRE: design forces and moment
You can go through the following link for beam design according to IS 456communities.bentley.com/.../27444.beam-verification-example-01
View ArticleRE: design forces and moment
You can go through the following link for Column design according to IS 456communities.bentley.com/.../27443.column-design-verification-example-02
View Articledesign forces and moment
after analyzing a r c building what forces and moments need to be considered to design the basic strcutural elements .How to consider a moment for beam ,axial force for column ......pls reply
View ArticleRE: SP3D - STAAD - SP3D model transfer
I tried using CIS/2. SP3D import log file shows no member transferred. On the other hand, the .stp file created from STAAD shows members.
View ArticleRE: i can not find chinese library on Limcon 3.63.2.6, how i can download it ?
I know there is a problem with the distribution of the Japanese shapes (see this post communities.bentley.com/.../26841.missing-japanese-sections-in-limcon) but the Chinese sections seem to be...
View Articlei can not find chinese library on Limcon 3.63.2.6, how i can download it ?
i can not find chinese library on Limcon 3.63.2.6, how i can download it ?
View Article