RE: STAAD Foundation Advanced v. 7.2
In the example cited in the query, the exposure, class and elevation at which the wind pressure is calculated are not mentioned or no file is attached. If you can attach your input file or the data as...
View ArticleSTAAD Foundation Advanced v. 7.2
Using the vertical vessel design in the Plant Foundation Mode it appears that the wind load output values that are contained in the "Calculation Sheet" are questionable. Using the "Calculation Sheet"...
View ArticleRE: Problems Downloading RAM Structural System
If you have the extracted files, just run the msi file(s).
View ArticleRE: Staad Advanced foundation Unexpected Results
I exported the input data from the files attached to a spreadsheet and then imported the same into a new SFA file (build 20.07.00.06). For both the combined footings, there is a punching shear failure...
View ArticleStaad Advanced foundation Unexpected Results
Hello,I am trying to design a foundation using Staad advanced foundation (V8i) using Eurocode. Reactions were imported from Staad steel design file. One of the foundaiton strips is failing in punching...
View ArticleRE: STAAD Foundation Advanced-Plant Foundation Mode
As of now, the Data Input Wizard does not contain any options for specifying input that is exclusively for design of pedestals. We will consider it for future enhancement.
View ArticleRE: Font resizing issue in staad foundation advanced 8.0
I would like to keep you updated on GA drawing issues. Our developers have already worked on provision of editing GA drawings. It will be available with the next release of SFA.
View ArticleFont resizing issue in staad foundation advanced 8.0
I am facing following problems with staad fdn adv ver 8.0.1. The font being shown by the software in the GA and detailed scheduled drawing is extremely small an unreadable. Also it is not getting...
View ArticleMoving load application...
I am analyzing bridge loop in STAAD Pro, I wanted to assign moving load in circular direction with change in elevation.Is it possible to assign moving load in circular direction and with change in...
View ArticleRE: Is it possible to assign a different fy to horizontal reinforcement in...
Thanks. I logged it (no idea when we might have a chance to implement it yet). Enhancement 366454:Allow different rebar grades (fy values) for vertical bars and horizontal bars
View ArticleIs it possible to assign a different fy to horizontal reinforcement in RAM...
I'd like to assign fy=75ksi to vertical reinforcing and fy= 60ksi to horizontal reinforcing in my concrete shearwalls. It doesn't appear that fy can be changed in the RAM Concrete Module, and the RAM...
View ArticleRE: suspension bridge
If you do a lot of suspension bridges you might also want to check out RM Bridge.
View Articlesuspension bridge
is it possible to analyse a suspension bridge in staad pro.?if we can,how can i analyse "PUNALUR SUSPENSION BRIDGE", location -kerala,india
View ArticleRE: Design capacities not showing in results
This is a known issue and is documented at communities.bentley.com/.../22866.known-issues-in-staad-pro-ss6 Please refer to the defect # 290989 and the suggested workaround.
View ArticleClik here to view.
Design capacities not showing in results
The program is not displaying the design moment capacities (MNZ and MNY )for steel members. Some bracing members are showing no compressive (PNC) strength as well. This problem started after our...
View ArticleRE: STAAD News is not showing
A workaround to the issue has now been posted at communities.bentley.com/.../22866.known-issues-in-staad-pro-ss6 Please look at the one which mentions Defect# 357132
View ArticleSTAAD News is not showing
Hi, Dear All,Could anyone please let me know why my "STAAD News" is not showing? I am using Bentley Leap Bridge also, and the LEAP Bridge news is showing well.Thanks,Dong
View ArticleRE: Microstran - importing files from SPACEGASS
Send over the file if you can (use the secure file upload link below left if necessary). I think an older version of Microstran included a converter that we can try.
View ArticleMicrostran - importing files from SPACEGASS
I've got a large model that's been drawn up in SPACEGASS. Our office is moving from a SPACEGASS license to Microstran, since it's included in our Bentley license.Is there any way of importing the model...
View ArticleRE: Period and Mass participation of the building in RAM SS
I ran the model (Oracle_VB5.rss) in v15.0 using the same options you had. As noted, the mass participation is low using 10 mode shapes. The general shape of the modes and period values seem reasonable...
View Article