Using the vertical vessel design in the Plant Foundation Mode it appears that the wind load output values that are contained in the "Calculation Sheet" are questionable. Using the "Calculation Sheet" output values and plugging them into the Design Wind Pressure formula (by hand), the results give different values than those contained within the output.
Example: "Calculation Sheet" values.......Kd = 0.95, Kz = 1.03, Kzt = 1.00, v = 115 mph, I = 1.15, G = 0.85, Cf = 1.00
"Calculation Sheet" output gives Design Wind Pressure (P) = 38.106 psf
Hand Calculations give Design Wind Pressure (P) = 32.383 psf
Please verify correctness of Wind Load Calculations and advise!- W