RE: Flat slab and column structure
Follow the other post you made. Using STAAD.pro + Ram Concept is the best solution we have for flat slab design. communities.bentley.com/.../100804
View ArticleRE: HSS Connections in RAM Connections
Are we any closer to directly welded HSS connections?
View ArticleRE: ISM Version 5.0 Capabilities and Limitations
I'll chime in and say that I would use the Rebar from RAM Structural and Concept for detailing, scheduling and visualization. I think I'm already on the list of people who want 2 way transfer of rebar...
View ArticleRE: How would i know the day that STAAD purchase?
I think the best bet for you would be to contact Bentley and find that out. Depending on your location, you can use the appropriate contact information listed atwww.bentley.com/.../contact-us
View ArticleRE: ISM Version 5.0 Capabilities and Limitations
Seth, the answer to your question is all 5. RAM Concept is capable of producing a quite elaborate 3-D floor plate reinforcement model and it seems such a tragic waste not to have that available in...
View ArticleRE: ISM Version 5.0 Capabilities and Limitations
Thanks. We do offers some tools like ProConcrete that read in ISM rebar which can then be fully detailed and scheduled, but if you only have Revit that's no help. The IFC option might work, but I don't...
View ArticleRE: Do Staad.pro Can Analyze Structure with Flat Slab?
Thank you so much Sir. I want to confirm something that while modelling flat slab using plates in staad, the necessary points are 1. proper meshing of plates 2. master slave definition for the whole...
View ArticleRE: Do Staad.pro Can Analyze Structure with Flat Slab?
Meshing the slab is important as you said. However please note that if you are modeling the floor using plates having appropriate thickness, you are already accounting for the stiffness due to the flat...
View ArticleRE: Do Staad.pro Can Analyze Structure with Flat Slab?
Thank you so much sir. This really helps. Regards Kaushal
View ArticleRE: regarding column shedule for RC structure in staadpro
Hi veeresh rao, You can export the Schedule drawing to DXF or Multirebar. The table contents can be transferred to Excel directly by copy-paste.
View Articleregarding column shedule for RC structure in staadpro
hello guysi have question regarding exporting column schedule details floor wise to excel sheet.do i need to install separate software or can i get it done from staadpro itself, really looking forward...
View ArticleHow to convert Vertical DL to Lateral Loads (x & z directions) with a factor
HI,How to convert Vertical DL to Lateral Loads (x & z directions) with a factor. In my shipping/transportation load condition, I need to combine: Equipment dead weight with 0.3 lateral loads of...
View ArticleLocal axes of a single angle
Hi,I'm modeling a gate that has inclined single angle arms. I've adjusted the beta angle to keep the vertical legs parallel to the global vertical axis (y), but now it appears that local axes are not...
View ArticleHSS Connections in RAM Connections
I heard there are plans to include HSS welded connections in RAM Connection. Is that true? I hope so because applying section K of AISC 360-05 (or 10) is very tedious. If this is to be included, when...
View Articleload combinations
Can i generate automatic load combination in staad pro using asce-7 combination for ASD or LRFD ?Thank you !!
View ArticleRE: Not Enough Memory in Sparse Solver
Hi Gorka,We need to investigate the issue in our system, so please upload the model (.std file).
View ArticleClik here to view.
Not Enough Memory in Sparse Solver
Hello,I have problems runing a big Staad pro model (165.000 nodes / 50.000 beams / 160.000 plates)I have tried run it with IN-CORE and OUT-CORE solver but I get the error that I send you on pictures...
View ArticleRE: How to convert Vertical DL to Lateral Loads (x & z directions) with a factor
Hi,You can use Notional Load which you can derive into vertical load from lateral load.Please find the attachment.(Please visit the site to view this file)
View Article