Clik here to view.
RE: Section Wizard
Section Wizard is definitely an active product but unfortunately there are no separate installers for it. It gets installed along with STAAD.Pro as most of our users use the program in conjunction with...
View ArticleSection Wizard
My company has purchased a license of SectionWizard, but I can't find a download of this software. If this software is still available, then why is it so unimaginably difficult to find the loader on...
View ArticleRE: Load envelope cases
Global Moment contours can only be plotted for individual load cases and combinations. These cannot be obtained for envelopes.
View ArticleRE: StaadPro 2003
I installed Sentinel HASP/LDK - Windows GUI Run-time Installer, and checked the compatibility and popup " the Hasp lock not found". How and what kind of adaptor do i need to buy to insert my HASP key...
View ArticleRE: STAAD-Pro Help: Bracing design in steel structure
Thanks a ton Sye! That helped a lot!
View ArticleRE: StaadPro 2003
I would not recommend using an adaptor. In the distant past I remember multiple users trying it unsuccessfully. I would highly recommend that you get the latest STAAD.Pro with SELECT license.
View ArticleRE: Still facing a problem to import into SP3D from STAAD
Can you send us the complete error log that gets generated after you try importing the CIS/2 file into SP3D ? Also what is the version of STAAD.Pro you are using ( 20.07.xx.xx number that you can check...
View ArticleClik here to view.
Dynamic Load Amplitude of Centrifugal Pump
Hi Everyone, can i ask you question..I have a project, it is design a platform for water intake pump.The questions is:1. Is it input for my model correct?2. I can't find amplitude from pump...
View ArticleRE: Instability of joint
Hello Sujendran,I saw a Service Request raised for the same issue which was attended and replied with modified input file. There was no error but a warning rather that could be ignored. However, to...
View ArticleInstability of joint
Hi everyone,I'm having problem with instability of joint 4572.[View:/cfs-file/__key/communityserver-discussions-components-files/5932/30MFBLOOSE.std:940:0]i went through few solutions but i could not...
View ArticleClik here to view.
Error log file and the STAAD PRO version
The STAAD PRO version used is - 20.07.11.33the log file is given below
View ArticleClik here to view.
RE: How to download staad pro ss6 v8i trial version
Hi Chandra, You can download the Bentley Software from http://select.bentley.com/FulfillmentCenter/ and use for 30 days trial. Please go through the software download instructions given in the...
View ArticleHow to download staad pro ss6 v8i trial version
Hi all,I need link to download trial version of staad pro ss6 v8i latest versionRegardschandra mathad
View ArticleRE: Limcon Suggestions
We will be merging the Limcon and Ram Connection programs and the ability to add stiffener and/or doubler plates in order to satisfy many of the connection types is already possible in Ram Connection.
View ArticleLimcon Suggestions
Hi guys,many times when checking connections, Limcon will indicate that the connection is not good, but the no compliance can easily be corrected by adding a stiffener or a reinforcing plate to a web...
View ArticleRE: How can I connect two bracing members from the top flange of one girder...
Since beam elements are line elements, there is no way to connect braces to flanges or webs of beams. However, as you suggested, you can use offsets to ensure that braces are connecting at the right...
View ArticleClik here to view.
How can I connect two bracing members from the top flange of one girder to...
In staad if one member has multiple bracing members connected at different components of that member (e.g flange, web etc) how can I assign those connections? Is it a viable option to use offset? Also,...
View ArticleRE: checked out license for STAAD.Pro
You don't need to check out the license. So please proceed with the activation process without checking out any license and you should be fine.
View Articlechecked out license for STAAD.Pro
today after installation from student server , of staad pro (version 20.07.11.70) ,while activating the license from product activation wizard ,an option came for choosing the checked out license,after...
View Article