RE: Auto load combination for General Category as per AISC
The AISC green book referred to ANSI A58.1 - MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES for load combinations. Subsequent versions of the AISC codes started referring the ASCE7 for these...
View ArticleClik here to view.
RE: STAAD-Pro Help: Bracing design in steel structure
Hi, Thanks for your reply.I have changed all LOAD COMB to REPEAT LOAD and have also added SET NL command (as that error appeared in analysis of load case 120, if not used). Now, I have few question on...
View ArticleClik here to view.
RE: To Import STAAD model to SP3D
Can you try creating physical members in STAAD.Pro before exporting the model to CIS/2. You can do so by selecting the entire model and choosing the option Auto Form Member as shown belowOnce the...
View ArticleRE: STAAD-Pro Help: Bracing design in steel structure
To begin with, here are the answers to your questions1. SET NL 100 is correct2. No, not required.3. Using negative is fine.4. I added the command SET ITERLIM 11 to the file which allowed the software...
View ArticleSTAAD-Pro Help: Bracing design in steel structure
Hi there,I have few queries regarding bracing design in attached STAAD models; which is basically a structural steel frame supporting supporting PV panels.1. In file named "Model_Tension only assign"...
View ArticleClik here to view.
Still facing a problem to import into SP3D from STAAD
Hi,I have tried importing STAAD model file into SP3D but i failed to import any member . I used the Auto form member option ,created the physical members and created a CIS/2 file. when i was importing...
View ArticleRE: StaadPro 2003
Can you please try the steps mentioned in the following Wiki Link, for running older version of STAAD products in Windows 7/ Windows...
View ArticleRE: Installation of Staad.pro
Please follow the steps mentioned in the following wiki link, for STAAD.Pro installationcommunities.bentley.com/.../9451.staad-pro-installation-instructions
View ArticleInstallation of Staad.pro
I downloaded staad.pro installer. When I started installing it, why there is a full list of other software in the list, apart from Staad.pro?
View ArticleRE: StaadPro 2003
STAAD.Pro 2003 has never been tested on Windows 8.1 OS, so it is not certified on it. You can try to run it, but it may have any unexpected issues and I would recommend you to download and install the...
View ArticleStaadPro 2003
Hi, Can I still use my StaadPro 2003 in Windows 8.1. How can I use my HASP key?
View ArticleRE: OpenSTAAD Objects for VBA (Do Not Seem To Work)?
Hi Suro, It's been a year... I am just studying this on my spare time and just recently, I had the opportunity to get back to this. Your answer helped in understanding this - that I am using an old...
View ArticleClik here to view.
OpenSTAAD Objects for VBA (Do Not Seem To Work)?
Hi there,I'm just learning how to use the OpenSTAAD and I just encountered something that seems not working. I tried adding the OpenSTAAD Library to Object Browser and it displays Output. It seems to...
View ArticleLoad envelope cases
I have certain queries in staad pro. Is staad able to give the global moment contours for plates for all the load envelope case.
View ArticleRE: STAAD Foundation
Thanks a lot for your effort , could you please told me how to check punching in STAAD Foundation
View ArticleRE: Structural Enterprise (SELECT vs. NON-SELECT)
Yes if you have Structural Enterprise License, you will be able to use all of these products. You can find more information at communities.bentley.com/.../29811.structural-enterprise
View ArticleOrientation of custom members/geometries using Section Wizard
Hello, I am creating custom members using the section wizard (i.e. channel member and T member connection) and I am unsure of the orientation of this custom geometry when I input this into STAAD by...
View ArticleClik here to view.
RE: STAAD Foundation
Assuming you are asking how to get this for the same combined footing job, you can find the information within the calculation sheet as shown next
View ArticleRE: Structural Enterprise (SELECT vs. NON-SELECT)
Sye is right if you have a SELECT license, but if you drop SELECT and go to a node locked license you will only get one or two of the products normally covered under the SEL, such that the value of the...
View ArticleClik here to view.
Structural Enterprise (SELECT vs. NON-SELECT)
Can somebody shed light for my concerns regarding Structural Enterprise license?After my SELECT subscription has expired, Bentley instructed me to run the non-SELECT license. Since I purchased the...
View Article