RE: Design of plate elements in Staad Pro
You can design a plate element in STAAD.Pro if the materiel of the plate is specified as Concrete. Concrete plate design option (Design Slab/Element) is available in the batch of of concrete design and...
View ArticleDesign of plate elements in Staad Pro
Please anyone can tell me whether STAAD PRo have stell design of plate elements?
View ArticleRE: steel structure
Maybe this wiki is helpful to you. Please use partial releases to replace the release and truss property.communities.bentley.com/.../2046.staad-pro-instability-and-zero-stiffness-faq
View Articlesteel structure
iam currently working on steel structure(stack supporting structure). iam confused about releases and the truss property. because when iam applying this property to member it gives only axial forces...
View ArticleClik here to view.
RE: how to find maximum axial , shear and bending moment carrying capacity of...
Hi,First, you should perform a analysis to your model.Second, click the postprocessing and select Property in Results Setup.Last, you can get the maximum axial , shear and bending moment carrying...
View ArticleRE: how to find maximum axial , shear and bending moment carrying capacity of...
thanks xingmin.li for quick reply but the procedure u suggested is for finding out the maximum end forces coming on the member due to applied loads , and not the maximum load carrying capacity of that...
View Articlehow to find maximum axial , shear and bending moment carrying capacity of a...
HiI have to design connection for sections in steel structure.And as per our client and applicable codes requirement I have to ensure that while designing connections , apart from maximum end forces...
View ArticleStaad.pro - Member 'Orientation' Label Size
HiBy right clicking on the screen, selecting labels, then checking the 'beam orientation' box we get the blue/red/green arrows displayed. Does anyone know how to change the size of the arrows relative...
View ArticleClik here to view.
RE: JOINT WEIGHT
Joint weights are used as part of seismic weight definitions. I guess your question is, how to add these joint weights using the GUI. Here is a screenshot explaining that.Here are a list of stepsGo to...
View ArticleRE: How to assign Joint Weights for seismic analysis
The question is answered at the following thread communities.bentley.com/.../113072
View ArticleHow to assign Joint Weights for seismic analysis
Hi collegues, Searching the forum didn't come up with anything useful about how to assign the joint weights which will be used in the seismic analysis. So I'll appreciate your help if you point out...
View ArticleRE: Roof Live Loads vs. Snow Loads RAM SS
A related comment: RAM SS Beam module does not handle Canadian (NBCC) load combinations properly where live loading and snow loading are combined. The NBCC combination would be 1.25D+1.5L+0.5S or...
View ArticleRE: Roof Live Loads vs. Snow Loads RAM SS
Indeed, in all the LRFD based codes we include all the live loads including roof and snow at the higher factor. Most beams only support one type or the other, but for those that support both it can be...
View ArticleRoof Live Loads vs. Snow Loads RAM SS
Has this been done yet?6) Snow Loads versus Roof Live LoadsWithin the Criteria -> Member Loads menu in RAM Manager there is an option to consider either roof live loads or snow loads during the...
View ArticleRE: Center of rigidity and Center of mass of floors with staad pro. Important...
The answers to your questions are1. Although the center of mass and center of rigidity are not printed in the tables like those in the post processing mode, but these can be printed as part of the...
View ArticleClik here to view.
RE: Create Wind Definition & Assign Wind Load for Bridge (AASHTO 2012)
Here are some pointers.Since you already know the intensity of pressure, you can directly feed that data into the intensity vs height data from inside Definitions > Wind Definitions. For details on...
View ArticleCreate Wind Definition & Assign Wind Load for Bridge (AASHTO 2012)
Following is for student project in Bridge Engineering class:We have modeled a two-span continuous bridge in STAAD. We intend to assign Wind loads, based on AASHTO 2012 values. How can a wind...
View ArticleRE: STAAD Planwin installation
Thank you very much. Some of our clients who has license for STAAD.Pro+US design code gets the over usage reports from Bentley for STAAD Planwin. This is because they accidentally try to click this or...
View ArticleSTAAD Planwin installation
When i install STAAD.Pro SS6 ?, Do i get STAAD Planwin program automatically installed ?
View Articleshear stress output from STAADPro
i just wondering, in STAADPro stated that if we want to get shear from element --> it shall multiply SQx or SQy with thickness of element. the thickness itself is it H or d (effective depth)?
View Article