Cannot open STAAD from Excel VBA Openstaad- Create Object - Regd
Dear All,I have done some coding using Excel OPENSTAAD. I used Set objOpenSTAAD = CreateObject("StaadPro.OpenSTAAD").Usually when i execute the command, STAAD opens up by itself runs the analysis.But...
View ArticleRE: Natural frequency and mode calculation:mass or weight
Dear Vishal, You are right about the internal conversion of weights to masses if the units selected as Newton or Kilo-Newton. But if your units are in Kilogram then there is no need to multiply the...
View ArticleRE: Natural frequency and mode calculation:mass or weight
Yes Kaushal, you are right. Changing unit system does not change results. Thank you for your reply.
View ArticleNatural frequency and mode calculation:mass or weight
I am trying to calculate natural frequency of steel structure using Eigenvalue method.My unit system is "kg mm".Now STAAD guidelines says"The input you specify is weights, not masses. Internally, STAAD...
View ArticleVBA GetSupportReactions
I use VBA to get support reactions. But results are always Zero. Please help me to find out what is the error.Private Sub CommandButton1_Click()Dim w1 As ObjectSet w1 =...
View Articlestaad foundations advanced
Has anyone had problems with Staad Foundation advanced crashing continuously? I have a simple building which needs just a series of combined footings, imported from a Staad model but it just crashes...
View ArticleClik here to view.
RE: introduction of expansion joint and bearings
Are you using STAAD.pro or one of our advanced Bridge analysis and design products like LEAP or RM? Are you just trying to model a roller support or something more advanced? It would help to have your...
View ArticleRE: introduction of expansion joint and bearings
i am using staad pro. its abridge design. one the capping beam are two transverse beams which are parallel to the capping beam. between the capping beam and the transverse beam is an elastrometric...
View ArticleClik here to view.
introduction of expansion joint and bearings
i am trying to design a bridge. i am having the following issues: to introduce the expansion jointsto introduce the bearingsto model the abutmentplease any useful information would be appreciated....
View ArticleRE: What is Be Inspired Awards Program?
This is a annual award competition, honors outstanding projects that are improving the world's infrastructure in remarkable ways. If your innovative project is among them and deserves consideration in...
View ArticleRE: error message : DATA SHOULD FOLLOW AFTER CONSTANT COMMAND and not any...
Dear Member, I analyzed your model in my system and found that some members are missing material property. To rectify the situation you can go to General > Material > and assign suitable for...
View Articleerror message : DATA SHOULD FOLLOW AFTER CONSTANT COMMAND and not any other...
I am new to staad pro.soy nuevo en esto, si la respuesta es en español, mucho mejorSTAAD SPACE DXF IMPORT OF JOIST DE 9 MT.DXFSTART JOB INFORMATIONENGINEER DATE 23-May-16END JOB INFORMATIONINPUT WIDTH...
View ArticleRE: introduction of expansion joint and bearings
You can split the support and use the same support condition at the end of the two beams, and those two beams are end-to-end connected by that "expansion-joint" member. Alternately, you can define one...
View ArticleRE: Change Command and Material Properties
You may try to use these options as shown in the attached file.(Please visit the site to view this file)
View ArticleRE: staad foundations advanced
If STAAD. Pro is also installed then uninstall the SFA 8.0 and the CONNECTION Client and then install SFA 8.0 once again along with the version of CONNECTION Client coming with STAAD Foundation...
View ArticleRE: Mass Participation is not showing more than 90%
You need to specify “CUT OFF MODE” command. However, you are using the time history analysis and so the mass participation factors should not affect. The mass participation factors are important when...
View Article