Base Plate
Dears:I have a problem in assigning sections when I dealing with CB ( column base ) to design base plate, It shows nothing but W-shape. How can I fixed that?Regards
View ArticleRE: Intel HD Display Driver stopped responding and has successfully recovered
Sir, download this Staad file and run on windows 10 and in staad pro select PAN (a hand tool to navigate the model) and flickering this model via PAN. And check what would happen.(Please visit the site...
View ArticleRE: Intel HD Display Driver stopped responding and has successfully recovered
The flickering occurs because the program keeps redrawing the view.
View ArticleClik here to view.
RE: How to get results of response spectrum analysis in terms of graphs in STAAD
Response-spectrum analysis provides insight into dynamic behavior by measuring pseudo-spectral acceleration, velocity, or displacement as a function of structural period for a given time .can we get...
View ArticleSteel Design Problem with Russia Code SP 16.13330 2011
Please find attached STAAD file. Always has error message "SP16.13330.2011 TABLE NO C.5: STEEL GRADE C235 * ERROR *". Steel members are not designed properly. Only load case 1 was considered. If I...
View ArticleRE: Get a list of Property name
I successfully run the macro. If ever anyone would want to use.You can use this code 'Get list of profiles used profiles = objOpenSTAAD.Property.GetSectionPropertyCount() Cells(4, 2).Value =...
View ArticleClik here to view.
Get a list of Property name
HiCould anyone help me on this one?Openstaad macro in excel.Im trying to get the list of profile used. Thanks.
View ArticleRE: LIMCON V3.63.1.16. Library not common for all Design Codes?
Hi Alex. You can add UB sections to the AISC.asc file and then select these sections as a beam along with a W section as a column section. Can you please confirm what version you are using when you...
View ArticleRE: ROD BRACING DESIGN IN STAAD
thanks amitva, and you are right . but in track 2 output for rod member design ,i see Results : Nan(pass) . in that case , i think it is better if staddpro displays a message saying the design of...
View ArticleRE: RAM Connection Standalone - Column-Beam-Brace Connection - Assign Single...
The error is:Assignment errors for joint 1Internal design error in the connection. Please contact technical support
View ArticleRE: RAM Connection Standalone - Column-Beam-Brace Connection - Assign Single...
Regretfully, this is a program defect that was introduced in version 11.0. The problem and a recommended work around are discussed on the web page...
View ArticleRE: ROD BRACING DESIGN IN STAAD
Here is a wiki that has discussions on the topiccommunities.bentley.com/.../26303.how-can-i-model-solid-rods-in-staad-pro
View ArticleROD BRACING DESIGN IN STAAD
Is there any Provision to design ROD Bracing in STAAD. If there is provision what will be procedure to design Single & Double ROD.
View ArticleClik here to view.
RE: need to Create a icon/button in toolbar so that I can run my Macro's...
You can add your macros to be part of the User Tools and can run it from the toolbar as explained in the following section of the help documentation
View Articleneed to Create a icon/button in toolbar so that I can run my Macro's directly...
I have some basic macros to select beams and nodes ... Everytime i'm using Tools -> User Tools to run it.. Instead I want to create a button to trigger that macro. Please help to sort out this problem.
View ArticleClik here to view.
ROD Bracing design in STAAD
Is there any Provision to design ROD Bracing in STAAD. If there is provision what will be procedure to design Single & Double ROD.
View ArticleClik here to view.
RE: RAM Connection Standalone - Column-Beam-Brace Connection - Assign Single...
Thanks, Karl, With Kind Regards, Mark JohnsonStructural Engineer T: +1 720 274-7820, M: +1 303- 770-0808, F: +1 303 770-8233,mark.johnson@thyssenkrupp.comThyssenKrupp Industrial Solutions (USA),...
View ArticleClik here to view.
RAM Connection Standalone - Column-Beam-Brace Connection - Assign Single...
Using RAM Connection Standalone, for a CBB (Column-Beam-Brace) connection, I cannot assign SP (Single Plate) connections from the Design\Assign tab. I get the following error:I can assign a double...
View ArticleRE: LIMCON V3.63.1.16. Library not common for all Design Codes?
The following wiki should answer your second query on how to create service requestcommunities.bentley.com/.../24845.service-request-manager
View Article