RE: (Staad-Pro RAM) How can I design a Gusset Connection for 100x100x10 SD...
As a matter of fact, if I use double channel UPN 100D then the extruded view in RAM module shows just a single UPN 100 not double cleatIf I use double angle then RAm does not recognize it ( I think...
View Article(Staad-Pro RAM) How can I design a Gusset Connection for 100x100x10 SD...
I am using RAM module of StaadProI have a column-beam-brace connection, the bracing element is a double angle 100x100x10 SD,I have tried all kind of configurations for the double angle but the...
View ArticleRE: Mode Shape
The 3rd. mode is a Torsional Mode. Regarding your model - Can you please check the connectivity between the plate elements. You can take help of the tool "Check Improperly Connected Plates" under the...
View ArticleRE: SHOULD I INCLUDE PERFECTLY VERTICAL LOADING COMBINATION 1.5(DL + LL) FOR...
First of all these combinations and load factors are prescribed by the respective code committees. It seems that some of the members in a structure may be critical under 1.5(DL+LL) combination rather...
View ArticleClik here to view.
UK Super Code
Dear Support, Why it isn't possible to use the BS code with the batch mode in STAAD.Pro ?is there a way ?\please help.Thanks in advance.
View ArticleRE: Intel HD Display Driver stopped responding and has successfully recovered
Search the web for the expression""Display driver stopped responding and has recovered"" and you will get hundreds of hits. This is a message from the operating system. See this...
View ArticleHow to perform a steady state analysis of structure?
How to perform a steady state analysis of structure? Can we obtain graphical results of steady state analysis in terms of time domain response
View ArticleRE: Mode Shape
In a torsional mode all three directions have zero or near zero participation. This happens as the mode shape has positive and negative terms due to which masses are moving in opposite directions,...
View ArticleRE: Intel HD Display Driver stopped responding and has successfully recovered
Sir, I already work in Staad pro SS6 product. But this problem occur.
View ArticleRE: PLANE STRESS WARNING
Using the Advanced Analysis engine, the model namedCWB PLANE STRESS.STDruns in SS6 Build 20.07.11.70 in about 19 minutes. There are numerous warnings about the loss of pressure loads that are applied...
View ArticlePLANE STRESS WARNING
Hi, I modelled a truss member using plate construction in STAAD, i applied plane stress option for all the diagonal members for transfering axial forces alone. But after analysis it is showing many...
View ArticleRE: Intel HD Display Driver stopped responding and has successfully recovered
Talk to your systems administrator about updating the driver for the graphics card: This PC - Properties - Device Manager - Display Adapters - Intel(R) HD Graphics - Update Driver software
View ArticleRE: Intel HD Display Driver stopped responding and has successfully recovered
Sir, I tried Everything.....every windows 10 occure this problem
View ArticleRE: Intel HD Display Driver stopped responding and has successfully recovered
Other than the annoyance caused by this message, what problem, if any, are you facing? Is it resulting in a work stoppage or error?
View ArticleRE: Intel HD Display Driver stopped responding and has successfully recovered
yes sir, windows hangs and work stopped and shows a black screen for 3-4 sec and after that windows 10 gives error "Intel HD Display Driver stopped responding and has successfully recovered" and staad...
View ArticleRE: Base Plate
Is this issue happening in RAM Connection standalone? Which version of the program are you using?
View ArticleRE: Intel HD Display Driver stopped responding and has successfully recovered
How frequently does this happen?
View ArticleRE: Base Plate
I believe this issue was fixed in the current RAM Connection version - build 11.0.0.177, so you may try to upgrade and see if that helps.
View Article