RE: Staad pro v8i-commands
Hefe are some shortcuts of commonly used commands. May it can help you. What are the shortcuts in STAAD Pro.? www.tinytopic.in/.../what-are-shortcuts-in-staad-pro.html
View ArticleStaad pro v8i-commands
Hello to all, I am working in MNC, we have licence staad pro v8i, its fantastic analytical tool. I want to get the list and use of all the staad commands. can any one help?
View ArticleProgressive Collapse Analysis
1) Is it possible to do "Progressive collapse analysis" in Staad, If so, how to perform it?? (with example)..2) Importance and Necessary for the "Progressive Collapse analysis"??3) What are the points...
View ArticleRE: Section Data Base not found in Code section
I have analyzed your model in the latest version of STAAD.Pro (SS6, build 20.07.11.45) but unable to duplicate the error. Program successfully designs all the members. Can you mention the build number...
View ArticleClik here to view.
RE: Model check
As you are using EN 1993 code, you need to use TRACK 4 command to print the deflection check results in the output design report. In your model, you have not specified any TRACK parameter. So the...
View ArticleRE: Section Data Base not found in Code section
Thank you Sir, for your kind response. I am Using Series 5 Build No.: 20.07.10.65. The data base is there. But due to some reason the program is not able to link it. Regarding the syntax of...
View ArticleSection Data Base not found in Code section
Dear Members, During Optimization Run, I am getting error "Sections data base not found in steel code". I have checked the installation directory, the database for European and AISC sections.mdp exist....
View ArticleOdd reporting in RAM Concrete column design - Columns classed as hangers...
Just been interrogating the RC column design on my model and was confused to see that on some levels that a column has been classified as a "HANGER" rather than "SHORT" or "SLENDER" . I've checked my...
View ArticleEccentricity of Column Loads
Hello,How can we consider Eccentricity of column loads in case of stepped column variation ( where we flush one side of the column and reduce the column size from the other side ). I have tried several...
View ArticleRE: Arch Culvert in STAAD pro
Keep in mind that in a true catenary arch under self-weight, the shear and bending is essentially zero as the force is carried almost exclusively by axial compression. Since your arch is kinked you'll...
View ArticleArch Culvert in STAAD pro
I am modeling RC arch culvert in STAAD PRO and I am interested in obtaining the shear force and bending moment values. This is a buried structure. I input the lateral earth pressure and vertical load...
View ArticleIn Staad Pro Select series 6, Concrete take off considers the steel quantity...
When checking the output Staad shows the following:(FOR BEAMS, COLUMNS AND PLATES DESIGNED ABOVE)NOTE: CONCRETE QUANTITY REPRESENTS VOLUME OF CONCRETE IN BEAMS, COLUMNS, AND PLATES DESIGNED ABOVE....
View ArticleClik here to view.
RE: Shortcut List for RAM Concept
One of our clever users found a way to make hot keys and posted a script to help.Trenno (Structural)Hi everyone, Just thought I would share my hotkey scripts since RAM concept has limited capacity to...
View ArticleShortcut List for RAM Concept
HelloIs there a shortcut list (Example: Ctrl+S, etc) for RAM Concept?Thank you
View ArticleRE: error: above line contains erroneous data
I ran the file in the OP on version 20.07.11.45 with no problems. What version are you running?
View ArticleRE: MFC Application Error and Backup Databases- RAM SS V15.0
We have filed a defect and our development team is diligently working on to fix the issue. The issue will affect anyone who is using the product with checked out licenses.
View ArticleMFC Application Error and Backup Databases- RAM SS V15.0
With the lastest RAM Structural System V15.0 any module being run while having the license checked out in the license utility causes an MFC application error this is especially problematic for anyone...
View ArticleRE: How can I create a STAAD model with data from excel file using VBA
There is no specific format. What I want to do is to read and use values in excel files. For example, let's say there is a excel file to calculate simple beam's size and I got the beam size after I...
View ArticleHow can I create a STAAD model with data from excel file using VBA
I have been trying to write a code to create a STAAD model by using the Geometry functions in the OpenSTAAD.How can I use some data from excel spread sheet.This is what I want to do.First, do some...
View Article