It seems like your question is on analysis. If your concern is on the deflection limit check (serviceability), then you need to input the DFF, DJ1 and DJ2 parameters in the design parameters.
Please refer to the following links for more detail.
communities.bentley.com/.../23987.serviceability-and-strength-check-for-the-same-load-combination
communities.bentley.com/.../12300.deflection-check-parameters
Please refer to the following links for more detail.
communities.bentley.com/.../23987.serviceability-and-strength-check-for-the-same-load-combination
communities.bentley.com/.../12300.deflection-check-parameters