happy new year
sandeep wishing you and your family a very happy and prosperous new year and all the staff
View ArticleRE: Plate creating problem using in-fill option
@Kris Sathia : Sir I have a query regarding a relatively simpler geometry but Staad is not being able to detect the polygon and apply infill plates option. It says "No closed polygon found to fill in...
View ArticlePlate creating problem using in-fill option
Hi,Please see attached model where I created a meshed model using beam members then used in-fill plate option to create FE plates. I selected all beams and then used this option but for some reasion...
View Articlea comparison purpose between an uneconomical design with a good design , By...
For a comparison purpose between an uneconomical design with a good design , By using STAAD i want to inter the concrete design detals for two building incloding section and reinforcemnt and let...
View ArticleClik here to view.
STAAD Error
What causes the following type of error? I got this when analysing with the Advanced analysis plus engine. Please help. Thanks in advance.
View ArticleRE: Plate creating problem using in-fill option
Though the message says polygon, the infill plates feature works only with 3-sided and 4-sided boundaries. That is because, the plate elements being created can only be 3-sided or 4-sided. For example,...
View ArticleRE: Problem in creating object with STAAD (I am using STAAD PRo. select...
THE NEXT POINT OF ERROR IS WITH SYNTAX I WAS USING WITH CREATE OBJECT. AND IT GETS STUCK UP AT objOpenSTAAD.GetSteelDesignResults2 memb, pnCriticalLC, pdCritRatio, _ pdCritSection, pdAllowStresses(0),...
View ArticleRE: Issue with governing load combination for steel member design
I am not sure which member you were investigating, however, here are few modifications which should lead to more expected results: 1) Change all load combination to repeat loads as you are using a...
View ArticleIssue with governing load combination for steel member design
Hi all,I have an entrance steel structure which is modelled in Staad pro. The member design has been done using Staad pro itself for basic load combinations as per BS code. With TRACK 2 option, the...
View ArticleRE: Effect of Angle Bar Offset
Hi Mac: I also wish you and your family and all others reading this post a Very happy and prosperous New year 2016. Please find the response to your queries as below: 1. Though I have mentioned that I...
View ArticleRE: Offshore structure seismic design in STAAD PRO
Firstly, it is better to admit my very little understanding of Offshore Structures. I understand that PLEM are structures which ensures proper tie in Subsea Pipelines. If you want to design this in...
View ArticleOffshore structure seismic design in STAAD PRO
Hi,Can anyone tell how to do seismic design in STAAD PRO for offshore structure i.e. Pipeline End Manifold (PLEM)? Which seismic code to be consider in STAAD PRO for Burma/Myanmar region?Is there any...
View ArticleRE: STAAD Foundation Advanced v. 7.2 customize quick access toolbar
Can you please send us a screen capture of the toolbar?
View ArticleClik here to view.
RE: STAAD Foundation Advanced v. 7.2 customize quick access toolbar
Please find the screen shot as requested. I would like to add the View tool - zoom by window.
View ArticleRE: STAAD Foundation Advanced v. 7.2 customize quick access toolbar
I don't think these settings are retained. So the customizations that you make to the toolbar is for that session only and will be reset once you close and reopen.
View ArticleRE: STAAD Foundation Advanced v. 7.2 customize quick access toolbar
Thanks! I would suggest this feature be incorporated in to the program in the future.
View ArticleRE: STAAD Foundation Advanced v. 7.2 customize quick access toolbar
Sure. I have passed on your suggestion to the product management team.
View ArticleSTAAD Foundation Advanced v. 7.2 customize quick access toolbar
When attempting to customize the quick access toolbar, a tool can be added. The issue I am having is that the added tool does notremain in the quick access toolbar after exiting and reopening the...
View ArticleRE: happy new year
You too. We hope to have lots of exciting new structural products and features this year. Thanks for being part of our forum.
View Article