Clik here to view.
Repeat Load from Reference Loads
I've looked through the manual and the forum here and haven't found a definitive answer. Can repeat loads be made from reference loads or can they only be made from primary load cases? The reason I...
View ArticleFrameless glass Design in Staad Pro
Hi,I need to design glass panel for frame less glazing ( Spider glazing). I need to check for deflection and stress analysis on glass panel due to wind load. Can somebody help me with the procedure to...
View Article[ERROR] NO LOAD CASE INCLUDED IN THE JOB IS DEFINED AS 'DESIGN LOAD CASE in...
I am using Staad foundation advanced to design my piling foundation. However, I got a error message :" [ERROR] NO LOAD CASE INCLUDED IN THE JOB IS DEFINED AS 'DESIGN LOAD CASE'". Please let me know how...
View ArticleHow to create concrete Columns "Rigid Elements" in assigned masonry shell.
I have imported my structural system model into Ram Elements 14 and attempting to use the assign module to design my CMU walls and shear walls.I have large concrete beams bearing on the CMU walls and...
View ArticleClik here to view.
RAM Structural Steel - How do I go about modeling a deck on a slab edge...
Hi! I am trying to model a deck on a set of roof beams. The joists in the grids extend beyond the enclosed beam grid. Is there a way I can model a deck, still having the RAM Steel Beam module to...
View ArticleClik here to view.
RAM steel column
Hello guys,I run into a situation where a different level (LV.3) needs to be created, so I make a copy from an existing level (LV.2) and modify the floor-to-floor height. After running column design on...
View ArticleClik here to view.
Ram frame - Sds (for Ev) in Load combination Generation
In Ram frame, the Sds (for Ev) value is not automatically generated and not shown in loads and applied forces report. Can you please let me know the reason.Also, is it possible to model secondary beams...
View ArticleClik here to view.
STAAD RUN IN VERSION 20.07.11.90 AND 20.07.11.33, GIVE DIFFERENT RESULTS !
Dear Bentley,I run the same file in two different Staad versions i.e. 20.07.11.90 and 20.07.11.33. To my big surprise, the output and results were totally different. There was a stark contrast in the...
View ArticlePlate members assigned to more than 10 groups
I currently have a complex model in which I have used groups in order to better organise members and plates elements. The problem I now have is that I have plate elements which exist in more than 10...
View ArticleNeed support reaction only-Staad pro.
Hi,I am trying to find load on each pile in a pile group by modeling pile cap with plate elements(did not do meshing) and a pier on it with beam member. Provided support type hinge at each pile...
View ArticleClik here to view.
Pipelink File STAAD.Pro Advanced CONNECT Edition - Version 21.00.01.12
Hi,I have been trying to export and import files to STAAD.Pro Advanced CONNECT Edition - Version 21.00.01.12 using pipelink.The files that STAAD tries to import and export are .pipelink.db files and...
View ArticleRam manger application has stopped working while creating ISM
hello there, Im trying to create ISM file for my RAM model to i can use it in Revit but every time im trying to do that the RAM manger crashed, i dont know why. so please if anyone can help me Ill be...
View ArticleLoad on piles - staad pro
Hi,Is it possible to calculate load on piles as calculated manually(please see attached file) in staad pro?Thank you(Please visit the site to view this file)
View ArticleSTAAD Foundation : Multiple columns in one footing
Is it possible to design a footing carrying 3 columns in STAAD Foundation?It can't be counted as combined since the 3rd column isn't collinear with the other two.Is it considered as a mat foundation?I...
View ArticleStaad Editor from Connect Edition to SS6 (downgrade)
Dear Support Bentley,I currently do moedling in STAAD connect edition and when I do run there is error message about member distributed load is outside member limit, I try to downgrade my file through...
View ArticleStaad.Offshore
Is Staad.Offshore still available/supported? I have used it in the past for generating transportation loads for Staad.Pro but, other than questions in this forum, I can find very little information...
View ArticleClik here to view.
Ram Connection - Fin Plate
Hello all,can i make fin plate connection when i working with AISC code? or how to make this type of connection?
View ArticleRCDC basement wall and column plates
So I modeled some project and I was curious to get things done faster by trying RCDC rather than just relying on STAAD for analysis and designing manually (By the way, is there anyone else other than...
View ArticleLarge Displacements
I modeled a 25 storey building frame and analyzed it for standard dead loads and live load and wind loads. But the results are showing very large displacements node to node as well as in beams for...
View Article