RE: WARNINGS DURING ANALYSIS.
It's very hard to say without the model (or a least of view of the design strips). Consider the bottom bars in a beam. The program is going to determine the number of bars (based on the bar size...
View ArticleClik here to view.
RE: CABLE/SOLID ROD
In addition to what Modestas has mentioned, you may find the following wiki useful
View ArticleRAM Baseplate Strain Compatibility
I’m looking into designing some baseplates with fixed bases (particularly biaxial bending). When designing in RAM Connection, you have the option to consider strain compatibility or ignore it. My...
View ArticleRE: Torsion on a RC Beam
Dear Sir/Madam, I would like to add a few points that are, in my opinion, very important in this case... 1. There are two types of Torsion - Equilibrium Torsion and Compatibility Torsion. Equilibrium...
View ArticleRE: Glazed Glass Problem
I would request someone to please verify whether my modelling was ok.
View ArticleSTAAD Error - MFC application has stopped working
Hi, We are using STAAD Pro (Select Series 6) version 20.07.11.70 During running the attached staad file we are getting error as MFC application has stopped working. We are not sure why we are getting...
View ArticleClik here to view.
DESIGN CODE LICENCE NOT ACTIVATED
IM USING STAAD PRO 20.07.11.82 INDIAN DESIGN CODE AND WHILE USING IT I FOUND THAT MY DESIGN CODE LICENCE IS NOT ACTIVATED AND DONT KNOW HOW TO ACTIVATE IT. IT PRESIST TILL NOW. IM UNABLE TO DESIGN. I...
View ArticleRE: A Warning In Staad Pro.
Hello Nageshwar Ratcha, This warning is shown by STAAD in order to give the user an alert that for a particular member two or more property section is defined, which as per your query is for member 42...
View ArticleA Warning In Staad Pro.
Hello Everyone,What is the meaning of this warning, ** WARNING-PROPERTY FOR MEMBER 42 DUPLICATED. LAST VALUE USED. 'thank you.
View ArticleClik here to view.
RE: DESIGN CODE LICENCE NOT ACTIVATED
Hello Mohd Aamir,The work around is stipulated in following link.
View ArticleRE: STAAD Error - MFC application has stopped working
Hi, I suggest you to please update to the latest version 20.07.11.82 first and we will sure have a look but no file has been attached.
View ArticleRE: A Warning in Staad Pro.
Hi, Tension/Compression analysis is automatically selected if any member or spring has been given the tension or compression only characteristic. This analysis is an iterative analysis which continues...
View ArticleProblem with Turkish Seismic Load Generator
Hi There,I am dealing with a structure in Turkey which is a high seismic risk zone. So, using my lovely STAAD, I am applying the seismic forces using STAAD Turkish Load Generator. I got 2 concerns:1-...
View ArticleRE: A Warning in Staad Pro.
Thank you very much, and is it a considerable warning or it's way to tell the user that some members were specified as inactive member?
View ArticleRE: A Warning in Staad Pro.
Hi, Yes, it is advisable to check all the warnings whether they are applicable for your analysis run or not. Regarding the queried warning, this method may not work in some cases because members are...
View ArticleA Warning in Staad Pro.
Hello Everyone,What is the meaning of this warning, ** WARNING - INACTIVE MEMBER SPECIFIED IN A TENSION/COMPRESSION ANALYSIS.Thank you.
View ArticleBeam End Reactions from RAM DatabaseAccess
Hi,I am trying to extract steel beam end reactions from RAM using VBA script. I want the unfactored Dead and Live reactions separately rather than the combined. I can only seem to achieve this using...
View ArticlePrint out of Loads from Load Combinations
I am working in STAAD.Pro V8i SS5 and need a print out or table of the load values from my Load Combinations. I can find the report generator section which tells me the loads applied for each basic...
View ArticleRE: Glazed Glass Problem
Everything, except the use of surfaces, look well in your model.
View Article