RE: Exported profile properties
Please read this instruction: communities.bentley.com/.../18842.inserting-and-attaching-images-videos-or-files-to-communities-content
View ArticleRE: Exported profile properties
When you open the model and the error message pops up, click Yes and the STAAD Editor will be opened. Find the line TABLE 1 D:\Autodesk\Staad profile\Transom\FW50-110-322420.UPT Make sure that your UPT...
View ArticleExported profile properties
I have a profile properties from free sketch. I exported it using .UPT and used the User table to assign the section properties in my framing. My problem is every time I edit the the analysis the...
View ArticleAASHTO design error message
I am wanting to design a pony-truss bridge structure in accordance with AASHTO LRFD specs. There are seven floor beams at the main panel points along the span. The interior floor beams cannot be...
View ArticleTruss member not being tensioned
hi allI have been trying to model a timber roof truss, support reactions are not too far from reality, however the horizontal steel member is not being tensioned as expected.Days have been spent but I...
View Articlereinforcement of concrete element
hello.the staad asing the reinforcemen steel with the charge combination most automatic critic?or how can i do to asing the charge combination most critic? since you are giving me the reinforcemen...
View ArticleClik here to view.
RE: Lpile Soil Descriptions - Using STAAD
Sye,Attaches is the soil parameters I have for the cemented soil. Unfortunately, I do not have a P-Y curve. I also have another question (if you don't mind): why does the calculation output read "fixed...
View ArticleLpile Soil Descriptions - Using STAAD
I have an Lpile document that describes three layers of soil as:Layer 1 : soft clayLayer 2: cemented siltLayer 3: stiff clay I am trying to compare this Lpile document to the results the Bentley STAAD...
View ArticleLIMCON - text file import/export errors
Hi i am using the import / export to text file component of LIMCON to do multiple similar connections at a time and i have noticed that there are features or attributes of the connection that are not...
View ArticleRE: How to input lateral systems in RAM
Take a look at the tutorial (available from the Ram Manager help menu or installed to the local drive as a pdf). With Ram Structural System every beam and column is designated as either gravity (only)...
View ArticleHow to input lateral systems in RAM
When I go into RAM Frame, I get the message "No lateral member or connected member found for diaphragm 1 for fifth story....." I wondering how and where to assign or place a lateral system/bracing etc....
View ArticleRE: Create Wind Definition & Assign Wind Load for Bridge (AASHTO 2012)
Sye, this is pretty clear to do, however, this doesn't answer how to apply the load to the structure. Do we add the points (as nodes) to the longitudinal beams of the bridge? We have these defined, as...
View ArticleCreate Wind Definition & Assign Wind Load for Bridge (AASHTO 2012)
Following is for student project in Bridge Engineering class:We have modeled a two-span continuous bridge in STAAD. We intend to assign Wind loads, based on AASHTO 2012 values. How can a wind...
View ArticleRE: BUCKLING CHECK ANALYSIS-STAAD PRO
Mr. Sye. My belief was that the structure can safely withstand loading without buckling up to applied load multiplied by buckling factor. But now I am shattered to find that nodal displacement may be 3...
View ArticleClik here to view.
RE: STAAD.Foundation Expires while others not
Please go through the following post where the same is discussed. Hope this helps you.
View ArticleRE: regarding error ** SECTION IS NOT ADEQUATE WARNING:Reinforcement %...
Can you please upload the model?
View ArticleRE: STAAD.Foundation Expires while others not
Generally STAAD.foundation 5.3 gets installed with STAAD.Pro V8i. Users are allowed to use 3 basic modules from it- Isolated footing module, combined footing module and pile cap footing module with out...
View ArticleClik here to view.
STAAD.Foundation Expires while others not
Good Day!I just want to ask why is it that STAAD.Foundation suddenly expired? and still cant use it, i tried to activate it on the license management status but still it is expired. While STAAD.pro...
View Article