RE: steel design
There are 2 parts to it. First, you need to specify the seismic parameters. In the STAAD input file, it is a block of data that begins with DEFINE 1893 LOAD You can find examples...
View Articlesteel design
Hi all, I have a query on steel structure design. I am designing a Diesel tank. I don't know how to check it's safe or unsafe. Please help me.regards, Karthika Nair P
View ArticleWELD SIZE IN "MM"
Dear allI am using RAM Connections for connection design. In SI system weld size is still displays weld size times 1/16 of an inch in all type of conection. But i need to exter value in using...
View ArticleLink Tekla with Limcon
HelloI have one question in structure detailing workflow between bentley Limcon with Tekla Structures, the connection can transfer from Tekla to Limcon and reverse ?Thanks All
View Articlewarning
Hi Forum,I am designing shear wall. While defining wall panel and run the staad it shows "WARNING- One or more lines are too long and will be split into 2 lines. Please suggest me a...
View ArticleRE: Range of Wind loads
Wind load can be generated on beam elements. In your model, you can use dummy beams and generate win load on the beam panels that the loads will be transferred to the plates. I would suggest you not to...
View ArticleRange of Wind loads
I have provided all the configurations. But after all it is saying that my structure is not in the range of wind load.Attached is my Staad editor file. Please help me with this.STAAD SPACESTART JOB...
View ArticleClik here to view.
RE: Concrete design parameter FC for EC2 code. Characteristic or design value...
The EC2 design (which had an outdated EC2 ENV 1992-1-1:1991 code version) is no longer available through the Batch mode. It is moved to interactive Concrete Design Mode, where the EN 1992-1-1:2004 is...
View ArticleClik here to view.
Concrete design parameter FC for EC2 code. Characteristic or design value to...
Hello, I need help with concrete design parameter FC for EC2 code. It's not clear - is it characteristic or design value?Is it characteristic cube strength Fck,cube from EN 1992-1-1?
View ArticleRE: There is an error named "copy protection device/system does not support...
Sye, the problem is solved by following your procedure. Really appreciate your help. I have another question about openSTAAD, is there any openSTAAD function that can support to extract the...
View ArticleRE: WELD SIZE IN "MM"
To AISC connections, “D” is the weld size as an integer (1/16 of an inch). All formulas and calculations uses the sixteenths of an inch part; when the user change unit system the weld must be entered...
View ArticleRE: REGARDING WELD SIZE IN RAM CONNECTIONS
The answer to your question is posted here: communities.bentley.com/.../364251
View ArticleREGARDING WELD SIZE IN RAM CONNECTIONS
Dear all I am using RAM Connections for connection design. In SI system weld size is still displayed in 1/16 of an inch in all type of connection. But I need to enter value in mm and not using...
View ArticleRE: RAM Concept - Lateral Self Equilibrium - user defined lateral nodal loads
You will need ot make sure that the summation of the moments about a point is zero and that the sum of Fz forces is also zero. If you don't then the program will simply add a stabilizing forces (843...
View ArticleRE: RAM Concept - Lateral Self Equilibrium - user defined lateral nodal loads
How do you use "Normal" analysis? Is this a setting somewhere?
View ArticleRE: RAM Concept - Lateral Self Equilibrium - user defined lateral nodal loads
It's a setting under Criteria - Loading. For details check out our wiki on Lateral SE analysis here: communities.bentley.com/.../ram-concept-lateral-self-equilibrium-analysis
View ArticleClik here to view.
RAM Concept - Lateral Self Equilibrium - user defined lateral nodal loads
In the RAM Concept Lateral Self Equilibrium [TN] discussion, at the very bottom of the page, there is a note that says, Note: Ram Structural System lateral loads will generally be exported to Ram...
View ArticleClik here to view.
RE: Link Tekla with Limcon
Not that I know of. We have some interop with Tekla through ISM, and there is a new version of the Tekla ISM plugin coming out by the end of the month, but Limcon does not currently have any...
View ArticleRE: Staad foundation Results
Hi Sriprakash, I have tried to answer your query in a wiki belowcommunities.bentley.com/.../27868.does-staad-foundation-advanced-save-results Regarding your other query, export to Word is not supported...
View Article