(Please visit the site to view this file)Mr.Sye ,
Thank you very much for explaining in an excellent manner. Is possible to get a sample model incorporating the commands DOM AND IMR as explained so as to get deeper understanding.
I modeled the structure as furnished by Mr.DSANJU on this topic by increased the floors and with necessary loads are added.
I tried many times to input the FLOOR DIA command but failed. Even when I tried to make use of MASTER-SLAVE command I get an error message of NO DIAPHRAGM IS present. The input command of FLOOR DIA is as in the model as below. Please help to get rid of the ERROR message.
Also need how to input the IMR as well as DOM command as explained in the previous postings for this structure.
Attached the model file.
Thanks in advance.
2405. ********FLOOR DIAPHRAGM*******
2406. FLOOR DIAPHRAGM
2407. DIA 1 TYPE RIG YR -0.1 0.1 JOINT XR -2 56.5 ZR -5 68.5
2408. DIA 2 TYPE RIG YR 1.94 1.96 JOINT XR -2 56.5 ZR -5 68.5
2409. DIA 3 TYPE RIG YR 3.8 4.0 JOINT XR -2 56.5 ZR -5 68.5
2411. DIA 4 TYPE RIG YR 5.45 5.65 JOINT XR -2 56.5 ZR -5 68.5
2413. DIA 5 TYPE RIG YR 7.1 7.3 JOINT XR -2 56.5 ZR -5 68.5
2415. DIA 6 TYPE RIG YR 8.7 8.9 JOINT XR -2 56.5 ZR -5 68.5
2417. DIA 7 TYPE RIG YR 10.4 10.6 JOINT XR -2 56.5 ZR -5 68.5
2419. DIA 8 TYPE RIG YR 12.0 12.25 JOINT XR -2 56.5 ZR -5 68.5
2421. DIA 9 TYPE RIG YR 13.7 13.9 JOINT XR -2 56.5 ZR -5 68.5
2423. DIA 10 TYPE RIG YR 15.4 15.5 JOINT XR -2 56.5 ZR -5 68.5
2425. DIA 11 TYPE RIG YR 17.0 17.2 JOINT XR -2 56.5 ZR -5 68.5
2427. DIA 12 TYPE RIG YR 18.65 18.85 JOINT XR -2 56.5 ZR -5 68.5
2429. DIA 13 TYPE RIG YR 20.3 20.5 JOINT XR -2 56.5 ZR -5 68.5
2431. DIA 14 TYPE RIG YR 22.0 22.2 JOINT XR -2 56.5 ZR -5 68.5
2433. DIA 15 TYPE RIG YR 23.6 23.8 JOINT XR -2 56.5 ZR -5 68.5
2434. CHECK SOFT STOREY
*** ERROR : FLOOR DIAPHRAGM INPUT IS NOT CORRECT.