Dear Support,
I was going through your suggested beam verification example and calculations.I have below questions:
1.SP16-Table no50 is for Fck=20Kn/mm2 AND Fe 415 .But in example Fck is 25Kn/mm2 & d'/d ratio ~.15 and data found for 3.1 =Mu/bd2 ,Pt to be 1.066 but in example the reference value used was Pt =1.039 for 3.1 =Mu/bd2.How you intrepreted that and same found for other 2 points as well.
2.Have you also intrepreted d'/d ratio values for Pt
↧
RE: How to validate STAAD.Pro Analysis Result by Hand Calculations IS 456 2000
↧