Hi Sye. Thank for the help.. Anyway, I tried running the modified file that you have uploaded, it says
***********************************************************
* *
* Z DIRECTION : Ta = 0.287 Tb = 0.000 Tuser = 0.000 *
* T = 0.000, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.1294 X 667.23 = 86.35 KN *
* *
***********************************************************
75. CHANGE
76. LOAD 3 LOADTYPE WIND TITLE WINDLOAD@X
*** ERROR *** ABOVE LINE CONTAINS ERRONEOUS DATA.
DATA-CHECK MODE IS ENTERED.
PRIMARY LOAD CASE CAN ONLY BE ADDED IF SET NL COMMAND IS USED.
***********************************************************
* *
* Z DIRECTION : Ta = 0.287 Tb = 0.000 Tuser = 0.000 *
* T = 0.000, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.1294 X 667.23 = 86.35 KN *
* *
***********************************************************
75. CHANGE
76. LOAD 3 LOADTYPE WIND TITLE WINDLOAD@X
*** ERROR *** ABOVE LINE CONTAINS ERRONEOUS DATA.
DATA-CHECK MODE IS ENTERED.
PRIMARY LOAD CASE CAN ONLY BE ADDED IF SET NL COMMAND IS USED.
