Dear ,
Currently I am working on the shed having dimension of ( L=26.5m, B=22m & H= 20.5m) .
I am facing Problem to check deflection for the roof member having length of 22 meter ( column to column) ,
I made two separate STAAD file , Difference are described below :
1) Sloped roof having angle of 5.7 degree (Aprox) , In STAAD the Sloped roof member shows failure in defection check.
2) Where i made second file that having flat roof member (i.e no slope at roof member) in which STAAD shows this member Pass in deflection check.
Why STAAD showing this result ?
For your reference i have attached STAAD files. [View:/cfs-file/__key/communityserver-discussions-components-files/5932/STAAD-portal.std:940:0][View:/cfs-file/__key/communityserver-discussions-components-files/5932/STAAD-portal_2800_-top-member-flat_2900_.std:940:0]